Filter
Top Products
Magnum 6K8-Series Industrial Field Switch Installation and User Guide 03/06)
25
www GarrettCom com
..
unshielded and shielded twisted pair cables.
1. Using standard twisted pair media, insert either end of the cable with an RJ-45
plug into the RJ-45 connector of the port. Note that, even though the connector is
shielded, either unshielded or shielded cables and wiring may be used.
2. Connect the other end of the cable to the corresponding device
3. Use the LINK LED to ensure proper connectivity by noting that the LED will be
illuminated when the unit is powered and proper connection is established.
4. The auto-cross(Auto-MDIX) feature will eliminate the use of crossover cable, while
connecting the RJ-45 ports to any other RJ-45 device.
3.2.5 Connecting Twisted Pair (CAT5E or better, Unshielded or
Shielded)
The RJ-45 Gigabit ports of the Magnum 6K8-Series can be connected to the
media types, 1000BASE-T or CAT 5E or better 100-ohm UTP or shielded twisted pair
(STP) balanced cable. The CAT 5E or better 100-ohm UTP or shielded twisted pair
(STP) balanced cable is recommended to use when making 1000BASE-TX connections.
In either case, the max distance for unshielded twisted pair cabling is 100 meters (328 ft).
Media
IEEE Standard Connector
Twisted Pair (CAT 5E) 1000BASE-T RJ-45
NOTE : It is recommended that high quality CAT. 5E cables (which work for both 100
Mb and 1000Mb) be used whenever possible in order to provide flexibility in a
mixed-speed network.
The following procedure describes how to connect a 1000BASE-T twisted pair segment
to the RJ-45 port. The procedure is the same for both unshielded and shielded twisted
pair cables.
1. 1000Base-T connections require that all four pairs or wires be connected. Insert
either end of the cable with an RJ-45 plug into the RJ-45 connector of the port.
Note that, even though the connector is shielded, either unshielded or shielded
cables and wiring may be used.
2. Connect the other end of the cable to the corresponding device
3. Use the LINK LED to ensure proper connectivity by noting that the LED will be
illuminated when the unit is powered and proper connection is established
3.2.6 Connecting Gigabit Media Using GBICs
The Gigabit ports accept industry-standard GBICs for
user selection of the gigabit media type desired. A
selection of fiber and copper GBICs are available.
3.3 DIN-Rail Mounting
The Magnum 6K8 is designed for use in a “factory
floor” industrial environment. It is available with optional
DIN-Rail brackets to mount it securely in a metal factory