Filter
Top Products
is only to be placed across pins 5 & 6. Others are not used.
JUMPER ACROSS DISTANCES SUPPORTED
1 - 2 0 - 10 km
3 - 4 not used
5 - 6 not used
Note: Be sure to use single-mode fiber optic cable with this module.
Single-mode fiber has a smaller diameter than multi-mode fiber
(2/15 - 8/60 microns for single-mode, 50/125 or 62.5/125 microns
for multi-mode, where xx/xx are the diameters of the core and the
core plus the cladding respectively).
2.3.7 RPM-DTE
The Magnum RPM-DTE is a module
equipped with a 15-pin male DTE connector
with lock posts. (The RPM-DTE is a mating
connector for the RPM-AUI which has a 15-pin
female connector and slide locks. The pin
assignments of the two are the same). The
RPM-DTE card is designed to support direct Magnum RPM-DTE
connections (no transceiver required) using AUI drop cables to any device that is equipped
with an AUI port. Examples of such devices include servers, routers, bridges, hubs, and
UNIX workstations.
1 2
3 4
5 6
J1
DEFAULT
1
2
Partition LED
Receive LED
1
2
Standard 15-pin
male "AUI"