Filter
Top Products
103
Using S/PDIF digital audio
www.gateway.com
Using S/PDIF digital audio
To listen to your notebook on a stereo system using the S/PDIF digital audio
jack, you must activate S/PDIF.
To activate S/PDIF digital audio:
1 Connect the digital audio cable to the adapter, then plug the adapter into
universal jack 3 on the side of your notebook. For the location of universal
jack 3, see “Left Side” on page 3.
-OR-
Plug one end of the Toslink cable into the S/PDIF digital audio jack on
the back of your port replicator. For the location of the S/PDIF digital audio
jack, see “Back” on page 269.
2 Plug the other end of the cable into your stereo receiver.
3 Open the Master Volume or Volume Control window. For more information,
see “Adjusting the volume in Windows XP” on page 92 or “Adjusting the
volume in Windows 2000” on page 95.
4 Click Advanced in the Master Volume area. If the Advanced button does not
appear in the
Master Volume area, click Options, then Advanced Controls.
Tips & Tricks You can purchase an adapter at your local electronic parts
store. We suggest a Y-Adapter Audio Cable or a Stereo
Audio Adapter.