Filter
Top Products
2-14
CHAPTER 2
2.4.5 Connect the Gateway to a Printer
If you connect a printer to the Gateway, all the computer
users connected to your LAN can have access to the printer.
Connect a standard parallel printer cable to the Printer port
on the Gateway, and configure the printer server as
described in Section 5.1 "Install the Printer Port Monitor".
2.4.6 Connecting the Power Adapter
Plug the power adapter into the power socket on the
Gateway, and the other end into a power outlet. Check the
indicator marked Power on the front panel to be sure it is
on. If the Power indicator does not light up, refer to
Troubleshooting in Appendices "A. Troubleshooting".