Filter
Top Products
3-5
CHAPTER 3
3.2 Setting TCP/IP to Work with the Gateway
1.Click the Start button and choose Settings, then click
Control Panel.
2.Double click the Network icon. Select the TCP/IP line that
has been assigned to your network card in the
Configuration tab of the Network window.
3.Click the Properties button to set the TCP/IP protocol for
the Gateway.
4.You can dynamically assign TCP/IP address settings to a
client, or you can manually configure a client with address
settings to meet your specific network requirements. (Note
that the default IP address of the Gateway is 192.168.2.1.)