Filter
Top Products
5. Graphical User Interface
SPEED COMMAND (LPM)
GBC QUANTUM PUNCH
90 LPM
7
MODE
PROOF
UNLOAD
JOB MANAGER
LANGUAGE
1 2 3
4 5 6
7 8 9
0 OK
You have constant control of the Speed by controlling the LPM or Lifts Per
Minute and the size of each Lift by adjusting the number of sheets per Lift.
Lifts Per Minute (LPM) is controlled by pressing the Left – Right arrow buttons
above the numeric key pad. You will see the number change in the window. The
example above reads “90 LPM”. The choices are 60, 75, 90 and 105 LPM.
NOTE:
You would choose a lower speed for harder to handle media such as
jobs with heavier than normal curl or heavier than normal toner coverage.
Lift command (sheets punched per stroke).
The size of the lift is controlled by pressing the Up – Down arrows above the
numeric key pad. The numbers roughly equal the number of sheets of 24 pound
bond paper that would be picked at this setting. This feature does not actually
count sheets however and you should not expect the lift to be exactly this quan-
tity. The example shown is of a lift size of “7”
NOTE:
You would choose a lower lift for harder to handle media such as jobs
with heavier than normal curl or heavier than normal toner coverage.
17