Filter
Top Products
2
Introduction
Thank you for your purchase of a GE Z-Wave® control device.
Z-Wave technology is designed to automate lighting/home control
and provide easy remote operation of all your Z-Wave enabled de-
vices. The GE Z-Wave product family includes a variety of devices
to control lighting in your home. It is up to you whether you want
to control one room or your entire house and whether you want to
do it all now or start with one room and add more over time.
This switch is one component of a Z-Wave® control system and
is designed to work with all other Z-Wave enabled devices in a
home control network. It will also act as a wireless repeater to
insure that commands intended for another device in the network
are received, thereby extending the range of the wireless control-
ler. Z-Wave devices of other types and brands can be added to
the system and will also act as range extenders if they support
this function of repeating the signal received to other nodes in the
system.
CAUTION
This device is intended for installation in accordance with
the National Electric Code and local regulations in the United
States, or the Canadian Electrical Code and local regulations in
Canada. If you are unsure or uncomfortable about performing
this installation consult a qualified electrician.
This switch is designed for use only with permanently installed
fixtures. The device controlled by this Z-Wave switch must not
exceed 600 watts (Incandescent); 15 Amps, 1800W (Resistive);
or ½ HP (Motor).
NOT FOR USE WITH MEDICAL OR LIFE SUPPORT EQUIPMENT
Z-Wave enabled devices should never be used to supply power
to or control the On/Off status of medical and/or life support
equipment!
There are no user serviceable parts in this unit.
Z-Wave
®
Certified
Wireless Lighting Control
On/Off Relay Switch
and 3-Way Switch Kit