Open as PDF
6 of 10 P/N 1069668 • REV 1.0 • ISS 22FEB10
4. Change the Connect using drop-down menu to TCP/IP (Winsock) then input
Host address. The Managed Switches default IP address is 192.168.0.100 and
the default telnet port number is 23, then press the OK button.
Figure 6: The Connect to dialog window
Log on to the Console
Make sure the device finished booting. Once the telnet has connected to the
device, the hyper terminal will display the login request.
Then, the following message asks the login user name and password. The factory
default password as following and the login screen as following appear.
User name: admin