Filter
Top Products
11
Each extended location with a 4x4 Component Matrix Over CAT-5 Receiver can use
an RMT-4IR remote control to choose which source will be viewed by the attached
display. Pressing the numbered buttons will switch to the source connected to the
same numbered input on the 4x4 Component Matrix Over CAT-5.
To use the RMT-4 IR remote, remove the battery cover on the back of the remote
to reveal the battery compartment. Insert the included battery into the open battery
slot. The positive (+) should be facing up. Ensure that the both dip switches are in
the OFF position. Replace the battery cover. The remote ships with 2 batteries. One
battery is needed for operation and the other battery is complimentary.
LED Indicator
Input Selection
Buttons
Empty Battery Slot
IR Code Dip Switches
RMT-4IR REMOTE DESCRIPTION