Filter
Top Products
5
Power LED Indicator1
This LED will become active once the included 24V DC power adapter is
properly connected.
Output 1 Source LED Indicator2
The currently selected source being displayed on Monitor Output 1 will be
visually acknowledged by an active LED. There are 4 LED’s, one for each input
source.
Output 2 Source LED Indicator3
The currently selected source being displayed on Monitor Output 2 will be
visually acknowledged by an active LED. There are 4 LED’s, one for each input
source.
Output 3 Source LED Indicator4
The currently selected source being displayed on Monitor Output 3 will be
visually acknowledged by an active LED. There are 4 LED’s, one for each input
source.
Output 4 Source LED Indicator5
The currently selected source being displayed on Monitor Output 4 will be
visually acknowledged by an active LED. There are 4 LED’s, one for each input
source.
IR Receiver6
This port will receive IR commands from the included RMT-16IR remote control.
Power Button7
Pressing this button while the unit is on will place the unit in stand-by mode.
Pressing this button again while the unit is in stand-by will turn it on.
Output 1 Source Button8
Each press of this button will cycle through the 4 inputs which will be displayed
on the Monitor Output 1.
Output 2 Source Button9
Each press of this button will cycle through the 4 inputs which will be displayed
on the Monitor Output 2.
Output 3 Source Button10
Each press of this button will cycle through the 4 inputs which will be displayed
on the Monitor Output 3.
Output 4 Source Button11
Each press of this button will cycle through the 4 inputs which will be displayed
on the Monitor Output 4.
4X4 COMPONENT MATRIX OVER CAT-5 FRONT
PANEL DESCRIPTIONS