Filter
Top Products
Step 2 – Installing the Ribbon Cartridge
GB-6
6. Turn the ribbon winding knob in the arrow direction (located on
the cartridge) to take up slack in the ribbon.
7. Push the cartridge down gently until it clips into place at all four
locking points.
8. Turn the ribbon winding knob again in the direction of the arrow
to take up slack in the ribbon.
9. To ensure that the ribbon guide runs freely along the ribbon,
manually move the print carriage horizontally.
Replacing the Ribbon Cartridge
1. Make sure that the printer is turned off for at least 15 minutes.
Pay attention to the print head because it becomes hot
during operation.
2. Open the top printer cover.
3. Slide the ribbon guide out of the print head.
4. Remove the used ribbon cartridge by lifting it up.
Now, you are ready to insert the new ribbon cartridge.