Filter
Top Products
Step 2 – Installing the Ribbon Cartridge
GB-4
Step 2 – Installing the Ribbon Cartridge
1. Find the ribbon cartridge among the accessories.
Make sure that you are using only GENICOM original consumables.
1A3000B01
(3850 model)
to be used when the color
kit is not installed
Ribbon Guide
Ribbon Winding Knob
Cartridge Supports
1A3000B04
(3870Plus model)
to be used when the color
kit is installed
Ribbon Guide
White Plastic Snap Arm
Ribbon Winding Knob
Cartridge Support
2. Open the top cover using the small handles on either side of the
top cover.
3. Turn the printer on. The print carriage prepares for ribbon
cartridge installation. Before installing the ribbon cartridge turn
the ribbon winding knob in the arrow direction (located on the
cartridge) to take up slack in the ribbon.
To avoid damage to the ribbon, do not turn the winding knob in the wrong
direction.