Filter
Top Products
- 26 -7VM400AM-RZ Motherboard
English
Integrated Peripherals
CMOS Setup Utility-Copyright (C) 1984-2004 Award Software
Integrated Peripherals
OnChip IDE Channel0 [Enabled]
OnChip IDE Channel1 [Enabled]
OnChip Serial ATA [Enabled]
SATA Mode [RAID]
AC97 Audio [Auto]
VIA Onboard LAN [Enabled]
USB 1.1 Controller [Enabled]
USB 2.0 Controller [Enabled]
USB Keyboard Support [Disabled]
USB Mouse Support [Disabled]
Onboard Serial Port 1 [3F8/IRQ4]
Onboard Serial Port 2 [2F8/IRQ3]
Onboard Parallel Port [378/IRQ7]
Parallel Port Mode [SPP]
Game Port Address [201]
Midi Port Address [Disabled]
x Midi Port IRQ 10
higf: Move Enter: Select +/-/PU/PD: Value F10: Save ESC: Exit F1: General Help
F5: Previous Values F6: Fail-Safe Default F7: Optimized Defaults
Item Help
Menu Level}
If a hard disk
controller card is
used, set at Disabled
[Enabled]
Enable onboard IDE
channel
[Disabled]
Disable onboard IDE
channel
OnChip IDE Channel0
When set at "Enabled", it allows you to use the onboard primary PCI IDE. If a hard disk controller
card is used, please set at "Disabled".
Enabled Enable onboard 1st channel IDE port. (Default value)
Disabled Disable onboard 1st channel IDE port.
OnChip IDE Channel1
When set at "Enabled", it allows you to use the onboard secondary PCI IDE. If a hard disk controller
card is used, please set at "Disabled".
Enabled Enable onboard 2nd channel IDE port. (Default value)
Disabled Disable onboard 2nd channel IDE port.
OnChip Serial ATAA
Enabled Enable onboard VT8237 Serial ATA support. (Default value)
Disabled Disabled VT8237 Serial ATA support.
SATA Mode
RAID Select SATA chip function as RAID. (Default value)
IDE Select SATA chip function as IDE.
AC97 Audio
Auto Enable onboard AC'97 audio function. (Default value)
Disabled Disable this function.
VIA Onboard LAN
Enabled Enable onboard LAN function. (Default value)
Disabled Disable this function.
USB 1.1 Controller
Disable this function if you are not using the onboard USB feature.
Enabled Enable USB 1.1 controller. (Default value)
Disabled Disable USB 1.1 controller.
USB 2.0 Controller
Disable this function if you are not using the onboard USB feature.