Filter
Top Products
- 9 -
Hardware Installation Process
English
Hardware Installation Process
To set up your computer, you must complete the following steps:
Step 1- Set System Jumper (JP1)
Step 2- Install the Central Processing Unit (CPU)
Step 3- Install Memory Modules
Step 4- Install Expansion Cards
Step 5- Install I/O Peripherals Cables
Step 1: Set System Jumper (JP1)
The system bus frequency can be switched at 100/133/166/200MHz by adjusting system jumper (JP1).
(The internal frequency depend on CPU.)
JP1
Short: 100MHz
1
1
Open: 133/166/200MHz
Step 3
Step 2
Step 5
Step 5
Step 4
Step 1
100MHz : Fix FSB 200MHz CPU
133/166MHz : Supports FSB 266/333MHz CPU
If you want to use a CPU with 200MHz FSB, please
set JP1 to 100MHz.