Filter
Top Products
- 26 -7VM400M-RZ Motherboard
English
Power Management Setup
ACPI Suspend Type
S1(POS) Set ACPI suspend type to S1. (Default value)
S3(STR) Set ACPI suspend type to S3.
USB Device Wake-Up From S3
This function will available when "ACPI Suspend Type" set at "S3/STR".
Disabled USB device can't wake up system from S3.
Enabled USB device can wake up system from S3. (Default value)
Power LED in S1 state
Blinking In standby mode(S1), power LED will blink. (Default value)
Dual/Off In standby mode(S1):
a. If you use single color LED, power LED will ture off.
b. If you use dual color LED, power LED will ture to another color.
Soft-off by PWR-BTTN
Instant-off Press power button then Power off instantly. (Default value)
Delay 4 Sec. Press power button 4 sec to Power off. Enter suspend if button is pressed
less than 4 sec.
AC BACK Function
Soft-Off Always in Off state when AC back to the system. (Default value)
Full-On Always power on the system when AC back.
Memory System power on depends on the status before AC lost.
Keyboard Power On
Disabled Disable this function. (Default value)
Password Enter from 1 to 5 characters to set the keyboard power on password.
Keyboard 98 If your keyboard has a "POWER Key" button, you can press the key to
power on your system.
Mouse Power On
Disabled Disabled this function. (Default value)
Enabled Power on system by mouse event.
CMOS Setup Utility-Copyright (C) 1984-2004 Award Software
Power Management Setup
ACPI Suspend Type [S1(POS)]
x USB Device Wake-Up from S3 Disabled
Power LED in S1 state [Blinking]
Soft-Off by PWRBTN [Instant-Off]
AC BACK Function [Soft-Off]
Keyboard Power On [Disabled]
Mouse Power On [Disabled]
PME Event Wake Up [Enabled]
ModemRingOn/WakeOnLan [Enabled]
Resume by Alarm [Disabled]
x Date (of Month) Alarm Everyday
x Time (hh:mm:ss) Alarm 0 : 0 : 0
KLJI: Move Enter: Select +/-/PU/PD: Value F10: Save ESC: Exit F1: General Help
F5: Previous Values F6: Fail-Safe Defaults F7: Optimized Defaults
Item Help
Menu Level`
[S1]
Set suspend type to
Power On Suspend under
ACPI OS
[S3]
Set suspend type to
Suspend to RAM under
ACPI OS