Filter
Top Products
English
- 64 -GA-7VKML Series Motherboard
Q-Flash Utility Introduction
A. What is Q-Flash Utility?
Q-Flash utility is a pre-O.S. BIOS flash utility enables users to update its BIOS within BIOS
mode, no more fooling around any OS.
B. How to use Q-Flash?
a. After power on the computer, pressing <Del> immediately during POST (Power On Self Test) it
will allow you to enter AMI BIOS CMOS SETUP, then press <F8> to enter Flash utility.
b. Q-Flash Utility
Q-Flash Utility
Flash ROM Type.........................................SST 39SF020 256K
Enter: Run hi: Move ESC: Reset F10: Power Off
AMIBIOS SIMPLE SETUP UTILITY - VERSION 2.00
(C) 2001 American Megatrends, Inc. All Rights Reserved
STANDARD CMOS SETUP INTEGRATED PERIPHERALS
BIOS FEATURES SETUP HARDWARE MONITOR & MISC SETUP
CHIPSET FEATURES SETUP SUPERVISOR PASSWORD
POWER MANAGEMENT SETUP USER PASSWORD
PNP / PCI CONFIGURATION IDE HDD AUTO DETECTION
LOAD FAIL-SAFE DEFAULTS SAVE & EXIT SETUP
LOAD OPTIMIZED DEFAULTS EXIT WITHOUT SAVING
ESC: Quit hifg: Select Item F5: Old Values F6: Fail-Safe Values
F7: Optimized Values F8: Q-Flash Utility F10:Save & Exit
Time, Date , Hard Disk Type…
ENTER BIOS FLASH UTILITY (Y/N)? Y
Load BIOS from Floppy
Save BIOS to Floppy