Filter
Top Products
BIOS Setup
31
S.M.A.R.T. for Hard Disks
Enabled Enable HDD S.M.A.R.T. Capability.
Disabled Disable HDD S.M.A.R.T. Capability. (Default value)
Boot Up Num-Lock
On Keypad is number keys. (Default value)
Off Keypad is arrow keys.
Floppy Drive Seek
During POST, BIOS will determine the floppy disk drive installed is 40 or 80 tracks. 360 K type is 40
tracks 720 K, 1.2 M and 1.44 M are all 80 tracks.
Enabled BIOS searches for floppy disk drive to determine it is 40 or 80 tracks. Note
that BIOS can not tell from 720 K, 1.2 M or 1.44 M drive type as they are all
80tracks.
Disabled BIOS will not search for the type of floppy disk drive by track number. Note
that there will not be any warning message if the drive installed is 360 K.
(Default value)
Password Check
Please refer to the detail on P.47
Always The user must enter correct password in order to access the system and/or
BIOS Setup.
Setup The user must enter correct password in order to access BIOS setup utility.
(Default Value)
BIOS Flash Protection
This field lets you determine the states that flash BIOS.
Auto BIOS enables flash write access automatically when updating BIOS data/
DMI/ESCD. (Default Value)
Enabled During POST, DMI/ESCD would not be updated. But flash tools can update
BIOS always.