Filter
Top Products
GA-7VTXE/GA-7VTXH Motherboard
86
STEP 6: Load BIOS defaults.
Normally the system redetects all devices after BIOS has been upgraded. Therefore, we highly
recommend reloading the BIOS defaults after BIOS has been upgraded. This important step
resets everything after the flash.
(1) Take out the floppy diskette from floppy drive, and then restart the system. The boot up screen will
indicate your motherboard model and current BIOS version.
8ITXR F3
Check System Health OK, Vcore = 1.750V
CPUID : 0F0A Patch ID : 0009
Intel(R) Pentium(R) 4 Processor-1.50 GHz
RamBus/Host Frequency is 300/100MHz
Checking NVRAM
262144KB
Wait...
DEL: Setup F8: Boot Menu F12: Network boot
Press any key to contiune
( C ) American Megatrends Inc.,
63-0001-001199-00101111-071595-TEHAMA-GA8ITXR0-H
American Release:08/04/2001
Megatrends AMIBIOS (C) 1999 American Megatrend
(2) Don't forget to press <DEL> key to enter BIOS setup again when system is boot up. Use the
arrows to highlight the item "LOAD OPTIMIZED DEFAULTS" then press "Enter". System will
ask "Load OPTIMIZED Defaults (Y/N)?" Press "Y" and "Enter" keys to confirm.
AMIBIOS SIMPLE SETUP UTILITY - VERSION 2.00
(C) 2001 American Megatrends, Inc. All Rights Reserved
STANDARD CMOS SETUP INTEGRATED PERIPHERALS
BIOS FEATURES SETUP HARDWARE MONITOR & MISC SETUP
CHIPSET FEATURES SETUP SUPERVISOR PASSWORD
POWER MANAGEMENT SETUP USER PASSWORD
PNP / PCI CONFIGURATION IDE HDD AUTO DETECTION
LOAD FAIL-SAFE DEFAULTS SAVE & EXIT SETUP
LOAD OPTIMIZED DEFAULTS EXIT WITHOUT SAVING
ESC: Quit : Select Item (Shift)F3 : Select Language F5: Old Values
F6: Fail-Safe Values F7: Optimized Values F8: Flash Utility F10:Save & Exit
Current Language: English
Load Optimized Defaults
Load Optimized Defaults? (Y/N)?N