Filter
Top Products
GA-8S661FXM-775 Motherboard - 38 -
English
2-4 Power Management Setup
ACPI Suspend Type
S1(POS) Set ACPI suspend type to S1/POS (Power On Suspend). (Default value)
S3(STR) Set ACPI suspend type to S3/STR (Suspend To RAM).
Soft-Off by PWR-BTTN
Off Press power button to turn off the system instantly. (Default value)
Suspend Press power button for 4 seconds to turn off the system. The system will enter
suspendmode if the button is pressed for less than 4 seconds.
System After AC Back
Off When AC-power is back to the system, the system will be in "Off" state.
(Default value)
On When AC-power is back to the system, the system will be always in "On" state.
Laststate When AC-power is back to the system, the system will return to the last state
before AC-power was off.
IRQ [3-7, 9-15], NMI
When IRQ [3-7, 9-15] or NMI triggered, the suspend timer will be reloaded to prevent system from
getting into green mode.
Disabled Don't monitor IRQ [3-7, 9-15] or NMI.
Enabled Monitor IRQ [3-7, 9-15] or NMI. (Default value)
ModemRingOn
Disabled Disable ModemRingOn function.
Enabled Enable ModemRingOn function.(Default value)
CMOS Setup Utility-Copyright (C) 1984-2004 Award Software
Power Management Setup
ACPI Suspend Type [S1(POS)]
Soft-Off by PWR_BTTN [Off]
System After AC Back [Off]
IRQ [3-7, 9-15], NMI [Enabled]
ModemRingOn [Enabled]
PME Event Wake Up [Enabled]
Power On by Keyboard [Disabled]
Power On by Mouse [Disabled]
Resume by Alarm [Disabled]
x Month Alarm NA
x Day(of Month) Everyday
x Time(hh:mm:ss) 0 : 0 : 0
Power LED in S1 state [Blinking]
KLJI: Move Enter: Select +/-/PU/PD: Value F10: Save ESC: Exit F1: General Help
F5: Previous Values F6: Fail-Safe Defaults F7: Optimized Defaults
Item Help
Menu Level `
[S1]
Set suspend type to
Power On Suspend under
ACPI OS
[S3]
Set suspend type to
Suspend to RAM under
ACPI OS