Filter
Top Products
BIOS Setup- 41 -
English
2-6 PC Health Status
Reset Case Open Status
Disabled Don't reset case open status. (Default value)
Enabled Clear case open status at next boot.
Case Opened
If the case is closed, Case Opened will show "No."
If the case is opened, Case Opened will show "Yes."
If you want to reset Case Opened value, enable Reset Case Open Status and save the change
to CMOS, and then your computer will restart.
Current Voltage(V) Vcore / DDR 2.5V / +3.3V / +12V
Detect system's voltage status automatically.
Current CPU Temperature
Detect CPU temperature automatically.
Current CPU/SYSTEM FAN Speed (RPM)
Detect CPU/SYSTEM fan speed status automatically.
CPU Smart FAN Control
Eabled Enable the CPU Smart FAN Control function. (Default Value)
a. When the CPU temperature is higher than 65 degrees Celsius, CPU fan
will operate at full speed.
b. When the CPU temperature is between 20 and 65 degrees Celsius, the
CPU fan speed will change depending on the actual CPU temperature.
c. When the CPU temperature is lower than 20 degrees Celsius, CPU fan
will stop spinning.
Disabled Disable the CPU Smart FAN Control function.
CMOS Setup Utility-Copyright (C) 1984-2004 Award Software
PC Health Status
Reset Case Open Status [Disabled]
Case Opened Yes
Vcore OK
DDR 2.5V OK
+3.3V OK
+12V OK
Current CPU Temperature 33
o
C
Current CPU FAN Speed 4687 RPM
Current SYSTEM FAN Speed 0 RPM
CPU Smart FAN Control [Enabled]
CPU Smart FAN Mode [Auto]
KLJI: Move Enter: Select +/-/PU/PD: Value F10: Save ESC: Exit F1: General Help
F5: Previous Values F6: Fail-Safe Defaults F7: Optimized Defaults
Item Help
Menu Level `
[Disabled]
Don’t reset case
open status
[Enabled]
Clear case open status
and set to be Disabled
at next boot