Filter
Top Products
13
Hardware Installation Process
Step 2-5: PCI Expansion Card Installation
GS-SR125EDL provides expansion riser slots for two peripheral cards, 100/133MHz , one full-height/
one half-length. To install the peripheral, please go through the following steps.
Step 1 Remove the screws on the riser bracket.
Step 2 Detach the riser bracket with both hands.
Step 3 Installing the PCI Riser card. To install the riser card, just simply push it into the module.
Step 4 Secure the card with screws.
Repeat Step 3 & 4 to install the rest of add-on cards.
Step 5 Finally, align the stable racks to the system module (see the arrow direction mark 1), and push
down vertically.
Step 6 Reverse Step 1 & 2 to secure the riser bracket firmly. Installation completed.
Step 1
Step 2
Step 3 Step 4
PCI Slot 2 is not compliance with this model.