Filter
Top Products
43
BIOS Setup
4 Floppy Disk Controller
Enable and disable the function of floppy disk controller.
8Disabled Disable the configuration.
8Enabled Enable the configuration.
8Auto BIOS or O.S will select the configuration automatically.
4 Base I/O address
Set the base I/O address for the floppy disk controller by usine this option.
8Primary Set the base I/O address to 3F0~3F7. (Default)
8Secondary Set the base I/O address to 370~377
CUSB Host Controller
This option allows user to enable USB host controller.
8Enable Enable USB host controller. (Default Value)
8Disabled Disable this function.
COnboard PXE Function
This option allows user to enable PXE function.
8Enable Enable PXE function.
8Disabled Disable this function. (Default Value)
CSystem After AC Back
8On State System power state when AC cord is re-plugged.
8Off State Do not power on system when AC power is back. (Default Value)
8Last State Set system to the last sate when AC power is removed. Do not power on
system when AC power is back.