Filter
Top Products
5
Chapter 2
Hardware installation
2-1 Hardware installation Steps
Before using your computer, you had better complete the following steps:
1. Check motherboard jumper setting
2. Install CPU and Fan
3. Install System Memory (DIMM)
4. Install Expansion cards
5. Connect IDE and Front Panel /Back Panel cable
6. Connect ATX Power cable
7. Power-On and Load Standard Default
8. Reboot
9. Install Operating System
10. Install Driver and Utility
2-2 Checking Motherboard’s Jumper Setting
(1) Keyboard Power On function Enabled/Disabled (3-pin): JP1
When setting Enabled you can using keyboard by key in password to power on system.
Keyboard Power On Setting
2-3 closed K/B Power ON Enabled
JP1
1
3
JP1
1
3
1-2 closed K/B Power ON Disable
(Default)
(2) USB Power On function Enabled/Disabled (3-pin): JP3
When setting Enabled you can using USB Device to power on system.
1-2 closed USB Power On Disabled (Default)
2-3 closed USB Power On Enabled
JP3
13
JP3
13