15
Charging the battery
Ø Before you use the video camera for the first time,
please fully charge the NP60 battery with battery cradle for
at least three hours.
Loading the Battery into Battery cradle
Load NP60 battery into the battery cradle by following step:
Ø Face the battery up (with the charger’s graphic) side
upward, then slide the battery into charge according to the
correct polarity marks. (+ or -). The caution LED (red)
lights during charging.
(A) Charging it by USB cable
1. Connect the battery cradle and the computer with USB cable
2. I
t takes about three hours to achieve a full charge. Actual charging time depends on current battery
capacity and charging conditions. The caution LED (red) lights during charging and goes off after roughly
3 hours.
Charge by
USB
(USB port)
Charge by Power
Adaptor (DC In port)
Battery Cradle