Filter
Top Products
Installation
334183A 5
Installation
The MBTCP Gateway Module is available for use with
all GCA-based systems that have a compatible design.
Each MBTCP module requires the following to operate
in a system:
• Mounting hardware
• Compatible GCA system
Install the MBTCP module as explained in the system
operation manual or in the installation kit manual.
If the MBTCP is offered only as an accessory for your
system, see Accessories in the system operation man-
ual for available MBTCP kits.
Connect Cables
Connect cables as explained in the system operation
manual.
Rotary Switch
If your system has only one MBTCP module, keep the
rotary switch (S) at its default position of 0.
If the system has multiple MBTCP modules, use a
unique value (position) for each module. Remove the
access cover (E) to set the rotary switch (S) for each
module.
NOTICE
Route cables to avoid interference with moving
parts.
FIG.2
S
E