Filter
Top Products
Troubleshooting
334183A 7
Troubleshooting
MBTCP Module Errors
Module errors are triggered by overall system operation. The module status LED blinks red at a frequency of 1 Hz.
The red LED (F) will flash a code, pause, then repeat.
Module Status LED Signal Diagnosis Solution
3 red flashes The host of the mapped property is
not responding.
Check whether all system devices
are powered on.
Check cabling between all system
devices.
4 red flashes The host device (ADM) has not initi-
ated property mapping.
Disable and then re-enable the gate-
way module from the host device
(ADM).
5 red flashes The MBTCP module is not con-
nected.
Verify that the MBTCP module is con-
nected.
The system has an invalid network
Configuration.
Verify the proper network Confiugra-
tion.