Filter
Top Products
Remove the Alternator
3A1324B 3
Remove the Alternator
1. Shut off the system’s main air valve. Open the con-
trol box.
2. See F
IG. 1. Disconnect output power cable connec-
tions from alternator module (A). Disconnect ground
lead (G) from control box ground terminal (T).
3. Disconnect the power supply cables from the
Advanced Fluid Control Module (AFCM),
USB Module, and Display Module.
4. Systems with a USB Module: Disconnect and
save the cable (412) that runs from the AFCM to the
alternator.
5. Disconnect air regulator line and exhaust air line
from alternator module. Remove air regulator
assembly (R) from solenoid manifold (M). Install
plug (408) from kit in the open manifold port.
6. Remove four screws (S) from mounting to remove
alternator from control box.
FIG. 1. Remove Alternator Module
GS
T
Install plug (408)
in open port
R
A
M
ti16455a
Cable
connectors
ti16456a
Air regulator
line
Air exhaust
line
A