Filter
Top Products
Install the Kit
4 3A1324B
Install the Kit
Component Installation
1. Shut off electrical power at the main panel.
2. See F
IG. 2. Remove the square knockout in the side
of the control box. Install the power switch (402).
3. Install the power supply (401), line filter (403), and
terminal block (404), using supplied screws (405,
407, 406), as shown.
4. See F
IG. 2. Connect wire harness (410/LF) to the
line filter (403) and switch (402), as shown. See also
F
IG. 6, Electrical Schematic.
5. Connect the power supply wire harness (PS) to the
switch (402), as shown. See also F
IG. 6, Electrical
Schematic. Connect the PS ground wire to the
ground terminal (T) of the control box.
6. See F
IG. 5. Connect wire harness (411) to the line
filter (403) and terminal block (404), as shown. See
also F
IG. 6, Electrical Schematic.
FIG. 2. Install Power Supply Kit
405
401
407
403
ti16454b
406
402
LF(L)
LF(N)
1A: LF(N)
1: PS(N)
2A: LF(L)
2: PS(L)
PS(N)
PS(L)
PS(GND)
411 (see F
IG. 5)
C
410
404
T
FCM