Filter
Top Products
8/16-Port PS/2 KVM Switch
11 / 26
5. Operation & Usage
5.1 Set Password
At factory default the PS/2 KVM will not ask for password unless it is set by
user. You may press “Scroll Lock” twice followed by “F2” to bring up password
setting menu.
★ NOTE：Before you are familiarized with this device, it is strongly
recommended to use without password. If password is forgotten, please
send PS/2 KVM to your distributor for factory reset.
5.2 Activate OSD
To switch port, you may enter OSD menu to select port, or, use Hot-Key to
perform switching. To bring up OSD menu, please press “Scroll Lock”
twice to activate OSD Main Menu as illustrated below<fig.1>.
OSD Main Menu
<fig.1>