Filter
Top Products
8/16-Port PS/2 KVM Switch
18 / 26
5.9 OSD Rate / Scan Rate Setting
To set scan rate please press button to enter Scan Rate/OSD Rate
setting menu as illustrated below <fig.11>. The secondary menu functions are
F1 and ENTER button
SCAN RATE SETTING
Please note that scan rate is set 10 seconds at factory default. Please enter
desirable time interval (005~255 seconds) in the cursor and press ENTER to
confirm setting.
OSD RATE SETTING
¾ Press F1 to enter OSD TIME setting screen <fig.12>. Please enter OSD
RATE at bottom right corner (005~255 seconds).
¾ Press ENTER to complete setting (005~255 seconds) and returns to
OSD main menu.
¾ Please press ESC to clear OSD display if OSD Time is not set. When
OSD Time is set, please wait until setting time terminates. Note that
ESC button OSD cancellation cannot be used when OSD Time is set.
★ NOTE: When entering OSD RATE and SCAN RATE please enter complete
three digits. For example, to enter 5 seconds, please input 005; to enter 10
seconds, please input 010.
Main OSD scan rate setting menu
<fig.11>