Grundig STC 160 Head-End Station Quad Modulators Computer Hardware User Manual


 
- 12 -
5.3 Programming the HMM 470 modulator module
Notes:
– Entries are saved by pressing the
S
button.
—> You will be returned to the item “Selecting the module/channel strip”.
– The programming process can be cancelled by pressing and holding the
M
button.
—> You will be returned to the item “Selecting the module/channel strip”.
Switch on the head-end station.
—>
The display shows “SETUP BE160” and the software
version of the head-end station (e.g. V 7).
—>
In the
SETUP
menu, the output level of the output
collector can be adjusted
(see STC 160 assembly instructions).
Selecting the module / channel strip
•Press
repeatedly if necessary to select the particular
module (Bx …) or channel strip
A”,B”, C” or “D
to be
programmed.
•Pressthe
M
button to activate the channel strip.
—>
The display shows this menu (for example)
Bx 2A 4 AV MONO C21 “:
Bx indicates the slot
2 indicates slot no. 2
A indicates channel strip “A
C21 indicates the HF channel set
C5 12 S
C5 2 S3
B
Ein/On
SETUP
A
C
BE160
V 7
M
/
OU
Bx 2B
4 AV MONO
C23
Bx 2A 4 AV MONO
C21
BE
7
M M
/
Bx 2A
2
UT U
i
o / off