Hama VPL-CX86 Projector User Manual


 
C:\data\Projector\AirShot\AirShot_FMData\2634400112_VPL-
CX8676_AirShot\2634400112_VPL-
CX8676_AirShot\2634400112\2634400112VPLCX8676WW\02C01.fm
masterpage: Right
25
Others
VPL-CX86/CX76
2-634-400-11 (1)
Others
Troubleshooting
Symptom Cause and Remedy
The computer is not displayed
in the PC list. (Projector)
Projector Station for Air Shot Version 2 is not installed in the
computer nor started.
c Install it.
c Start Projector Station for Air Shot Version 2.
The supplied wireless LAN card is not inserted into the slot
of the projector or a card other than the supplied one is
inserted.
c Insert the supplied wireless LAN card.
The signal is extremely poor (the computer is distant from
the projector or there is an obstacle such as a concrete wall or
a steel partition/door between the computer and projector).
c Place the computer and projector near to each other or
ensure there is no such intervening obstacle.
When the computer is connected to the projector using the
USB wireless LAN module, the USB wireless LAN module
is disconnected.
c Restart Windows and Projector Station for Air Shot Version
2 and connect the USB wireless LAN module.
Before disconnecting the USB wireless LAN module, disconnect the
computer and projector.
In Simple Mode
Simple Mode of the projector or computer (Projector Station
for Air Shot Version 2) is not set to [On].
c Set Simple Mode to [On].
[Connected Projector] of the computer is not set to the
projector you want to connect.
c Add or select the projector to be connected by using
[Change Projector] of the computer.
In Manual Mode
The wireless and network settings of the projector or
computer are not set correctly.
c Check that the Network settings are the same as those of the
connected equipment.
Note