Filter
Top Products
C:\data\Projector\AirShot\AirShot_FMData\2634400112_VPL-
CX8676_AirShot\2634400112_VPL-
CX8676_AirShot\2634400112\2634400112VPLCX8676WW\02C01.fm
masterpage: Right
7
Wireless Connection
VPL-CX86/CX76
2-634-400-11 (1)
Wireless Connection
When the Simple Mode is selected in
automatic setup during installation, make
the following settings to connect the
computer and projector:
Setting the projector
1 Insert the supplied wireless LAN card
into the slot of the projector.
2 Turn on the projector.
3 Press the AIR SHOT key on the
remote commander.
The home display of Air Shot Version 2
appears.
Check that [Simple Mode] is selected.
If Simple Mode is not set to [On]
See steps 4 and 5 of “Connecting in the
Manual Mode” on page 11 and select Simple
Mode.
To change the network channel for
Simple Mode
When the communication is poor, change
the network channel.
The default setting is [11]. See steps 4 and 5
of “Connecting in the Manual Mode” on
page 11 and set [Network Channel] to
another channel. The channel is selected
from among 1 to 11.
• If the USB wireless LAN module is
connected to the computer, remove it before
setting.
• You may not be able to use some channels
according to the country/region.
• Follow the regulations of the country/region
where you use the unit.
Connecting in the Simple
Mode
Projector
USB wireless LAN
module (supplied)
Wireless LAN card
(supplied)
Computer
Notes
VPL-CX86 1000000 201 Meeting Room 43.2.60.123
Simple Mode
Model name
Serial number
Operations
guide
Nick name (only
when specified)
IP address
Mode
Icon
Icons representing wireless status:
being not connected
ad-hoc
infrastructure mode / / /
status when no wireless card is
inserted