Filter
Top Products
2-3
DIN Rail
NPort Server Lite can also be mounted on a standard 35-mm DIN Rail. First, use
two screws to attach each of the two DIN Rail brackets to the metal attachment
plates (Figs. 2-2a, b).
Figure 2-2a. DIN Rail Mounting Brackets—Inner Placement
Figure 2-2b. DIN Rail Mounting Brackets—Outer Placement
Since the screw heads are beveled, and the holes in the plate are countersunk, the
tops of the screws will be flush with the metal plates. This allows the metal
plates (now with the DIN Rail brackets attached) to be screwed to the bottom of
the server. Use three screws to attach the metal plate to the bottom of NPort
Server Lite, with the orientation as shown in Fig. 2-3a or Fig. 2-3b.