Filter
Top Products
2 - 8 IMAGETEAM™ 2020/5620 System Manual
All communication parameters between the scanner and terminal must match for
correct data transfer through the serial port using RS-232 protocol. Scanning the
RS-232 interface bar code, programs the scanner for an RS-232 interface at
38,400 baud, parity–none, 8 data bits, 1 stop bit, and adds a suffix of a CR LF.
RS-232 Baud Rate
Baud Rate sends the data from the scanner to the terminal at the specified rate.
The host terminal must be set for the same baud rate as the scanner.
Default = 38,400
.
RS-232 Interface
300
2400
600
1200
4800
* 38400
9600
19200
115,200
57,600