Filter
Top Products
3800g User’s Guide 2 - 7
Automatic Direct Connect Mode:
This selection can be used if you have an
IBM AT style terminal and the system is dropping characters.
Default = Off
RS-232 Baud Rate
Baud Rate sends the data from the imager to the terminal at the specified rate.
The host terminal must be set for the same baud rate as the imager.
Default = 115,200
.
Automatic Direct
Connect Mode On
* Automatic Direct Connect
Mode Off
300
2400
600
1200
4800
38400
9600
19200
* 115,200
57,600