Filter
Top Products
Quick Check® 600/800 Series User’s Guide 1 - 7
Specifications
Installing the Batteries
The Quick Check 600/800 Verifier is shipped with four “AA” NiCad rechargeable
batteries. You must install the batteries in the unit before you use it. The
batteries may be discharged and need to be charged.
You must install the four NiCad rechargeable batteries in the
Quick Check 600/800 Verifier before you connect the charger or
the printer to the unit. If you do not install the batteries first, you
may damage the unit and consequently void the warranty. Use
only the supplied batteries. If you use other types of batteries
(such as alkaline) and attempt to recharge them, you could
cause the batteries to explode, damage the unit, and possibly
cause a personal injury. Damage caused by attempts to
recharge any batteries, except those supplied with the unit, voids
any and all Quick Check 600/800 Verifier warranties.
Item Specification
Dimensions
4.30”W x 2.75”H x 5.25”D
(10.9 cm W x 7.0 cm H x 13.3 cm D)
Weight
1.0 lb. (454 g) with wand attached and batteries
installed
Temperature
Storage: -20° to 70°C
Operational: 0° to 50°C
Humidity 5% to 95% RH non condensing
Sealability Designed to meet NEMA 1
Regulatory approvals FCC - Class A limits
Display 4 x 20 characters/line LCD
Keypad 6-button: POWER, SELECT, ↑, ↓, ←, →
Audible signal
Volume/tone adjustable beeper
(includes volume off position)
LED indicators Five tri-colored LEDs
Batteries Four “AA” NiCad
Data Buffer
32 KB; the onboard memory can store data and scan
profiles.
WARNING