Harbor Freight Tools 92464 Power Supply User Manual


 
SKU 92464 Page 2
For technical questions, please call 1-800-444-3353.
Save This Manual
You will need the manual for the safety warnings and precautions, assembly
instructions, operating and maintenance procedures, parts list and diagram. Keep
your invoice with this manual. Write the invoice number on the inside of the front
cover. Keep the manual and invoice in a safe and dry place for future reference.
Safety Warnings and Precautions
WARNING: When using this device, basic safety precautions should always be
followed to reduce the risk of personal injury and damage to equipment.
Read all instructions before using this tool!
1. Do not plug in a battery charger if the charger has a warning that dangerous
voltages are present at the battery terminals.
2. Keep work area clean. Cluttered areas invite injuries.
3. Keep inverter away from any direct heat source or combustible material.
4. Observe work area conditions. Do not use machines or power tools in damp
or wet locations. Don’t expose to rain. Keep work area well lighted. Do not
Specifications
Continuous Power 2,000 Watts
Peak Power 4,000 Watts
Input Voltage 12 Volts Nominal DC (11-15 Volts possible)
Output Voltage 120 Volts AC at 60 Hz
AC Receptacles (2) Two 3-Prong, Polarized Outlets
Fuse
30 Amps, 8 Qty.
(internal, for replacement only by a qualified technician)
Dimensions 14” L x 9” W x 3-
1
/
2
” H
Weight 11.6 lb.
Indicators Green LED = power on
Switch Rocker type, On / Off
Operating Temperature 30-105° F
Recommended Input
Cord
Battery cable
(not included; #2 AWG or larger cables recommended)
Features
- Modified sine wave with overload protection
- Low voltage alarm
1
and shutdown
2
- Overvoltage shutoff
3
1 at 10.5 V; 2 at about 10 V; 3 at about 15 V
REV 03/05