Filter
Top Products
SKU 92464 Page 4
For technical questions, please call 1-800-444-3353.
17. Guard against electric shock.
Do not open the metal case; risk of electric shock.
Prevent body contact with grounded surfaces such as pipes, radia-
tors, ranges, and refrigerator enclosures during installation.
Connect all wires securely and cover the connections with insulat-
ing rubber boots (not included).
Store tools and metal objects away from the inverter.
18. Do not operate tool if under the influence of alcohol or drugs. Read warning
labels on prescriptions to determine if your judgment or reflexes are impaired
while taking drugs. If there is any doubt, do not operate the tool.
19. People with pacemakers should consult their physician(s) before using
this product. Electromagnetic fields in close proximity to a heart pacemaker
could cause interference to or failure of the pacemaker.
20. Keep the Inverter well-ventilated. Do not place any objects on top of or next
to the Inverter or allow anything to cover the cooling fans; doing so can cause
the Inverter to overheat, causing a potential fire hazard and/or damage to the
Inverter. Leave adequate ventilation space underneath the Inverter as well;
thick carpets or rugs can obstruct air flow, causing the Inverter to overheat.
21. Read and adhere to all warnings and safety precautions in the owner’s
manual for the device that this inverter is used to power.
22. A vehicle’s engine must never be used in any sealed structure. Carbon
monoxide is produced during operation and is DEADLY in a closed en-
vironment. Early signs of carbon monoxide poisoning resemble the flu, with
headaches, dizziness, or nausea. If you have these signs, get fresh air imme-
diately.
Note: Performance of this unit may vary depending on the available battery power
or appliance wattage.
Warning: The warnings, cautions, and instructions discussed in this instruction
manual cannot cover all possible conditions and situations that may occur.
It must be understood by the operator that common sense and caution are
factors which cannot be built into this product, but must be supplied by the
operator.
Unpacking
When unpacking, check to make sure that the Inverter is in good condition.
If any parts are missing or broken, please call Harbor Freight Tools at the number
on the cover of this manual as soon as possible.