Filter
Top Products
SKU 92464 Page 3
For technical questions, please call 1-800-444-3353.
use electrically powered tools in the presence of flammable gases or liquids.
5. Keep children away. Children must never be allowed in the work area. Do
not let them handle machines, tools, or extension cords.
6. Store idle equipment. When not in use, tools must be stored in a dry location
to inhibit rust. Always lock up tools and keep out of reach of children.
7. Use the right tool for the job. Do not attempt to force a small tool or attach-
ment to do the work of a larger industrial tool. There are certain applications
for which this tool was designed. It will do the job better and more safely at the
rate for which it was intended. Do not modify this tool and do not use this tool
for a purpose for which it was not intended.
8. Dress properly. Do not wear loose clothing or jewelry as they can be caught
in moving parts. Protective, electrically nonconductive clothes and nonskid
footwear are recommended when working. Wear restrictive hair covering to
contain long hair.
9. Use eye protection. Always wear ANSI approved impact safety goggles when
using tools.
10. Do not overreach. Keep proper footing and balance at all times. Do not reach
over or across running machines.
11. Maintain tools with care. Keep tools sharp and clean for better and safer
performance. Follow instructions for changing accessories. Inspect tool cords
periodically and, if damaged, have them repaired by an authorized techni-
cian.
12. Disconnect power. Unplug inverter when not in use.
13. Avoid unintentional starting. Be sure the switch is in the Off position when
not in use and before plugging in any appliance.
14. Stay alert. Watch what you are doing, use common sense. Do not operate any
tool when you are tired.
15. Check for damaged parts. Before using any tool, any part that appears
damaged should be carefully checked to determine that it will operate properly
and perform its intended function. Check for alignment and binding of moving
parts; any broken parts or mounting fixtures; and any other condition that may
affect proper operation. Any part that is damaged should be properly repaired
or replaced by a qualified technician. Do not use the tool if any switch does not
turn On and Off properly.
16. Servicing. This device should be serviced only by a qualified technician. This
item does not have any user-replaceable parts.