Hasselblad Flextight 343 Power Supply User Manual


 
Warnings and Restrictions
Read all of the included documentation before attempting to install
and use the scanner.
Do not touch the originals and/or the original holder while scanning.
Do not start scanning or previewing until an original holder with an
original has been mounted.
The original holder is only to be mounted or removed when the drum
is in the load position.
When you turn on the scanner, the drum will roll to the load position,
if it is not there already. Do not touch the scanner while the drum is
rotating.
Do not place your fingers or any other object into the scanner while it
is connected to power.
Before servicing or opening the scanner, the power supply must be
disconnected from the mains (unplugged). It is not sufficient simply to
press the on/off button.
Install the scanner in a location where children can not get to it. It
contains small openings and moving parts that can cause injury.
System Requirements
Below are the basic hardware requirements for the PC or Macintosh
system to which the scanner is to be connected.
For information about the processor, operating system, RAM and
harddisk requirements please refer to the “Software Reference” manual,
that comes with the FlexColor software.
Screen resolution of 800 x 600 pixels with true colors (24-bits).
Mouse or other pointing device.
FireWire interface
User's Guide - Flextight 343
Hardware Reference - Flextight 343
6
Warnings and Restrictions
English