Filter
Top Products
Front Panel
A Feed Table: place original holders here for scanning. The table can
be folded up to keep dust from entering the scanner and to keep it
out of the way.
B Light Area: for viewing originals. The grid helps you to align the
originals.
C Indicator light: The indicator can light up in 3 different colors
indicating the following:
Green (Power/Ready) - remains lit when ready to scan. Flashes
when first installed to indicate that firmware must be loaded (it will
be loaded automatically when you run FlexColor).
Yellow (Motor Drive) - when drum is repositioning.
Red (Scanning) - when scanning. Do not touch the scanner while
the indicator is red. If the light is flashing when not scanning, then
an error has occurred - please contact your Flextight dealer for
assistance.
D Power Switch: press to turn the unit on/off.
E Original Holder Clasp: all original holders slide into a slot here and
are held in place by magnets.
User's Guide - Flextight 343
Hardware Reference - Flextight 343
7
Front Panel
English
B
A
C
D
E
Figure 1: Front panel features of Flextight 343