Filter
Top Products
DIVA T/A PC Card Reference Guide 33
ISDN Configuration Commands—Continued
Command Description
AT!N3=n
AT!N31=n
ISDN Subaddress for 1
st
B-channel: The
ISDN subaddress is used to further identify the
terminal on the ISDN basic rate interface for
your primary (AT!N3=n) or alternate
(AT!N31=n) configuration. In cases where
two terminals share the same directory
number, the subaddress identifies which
terminal will answer a particular incoming
call. This number is a string with up to 20
characters. Valid characters are: 0-9, *, and #.
Default: null string (this is an optional value).
Note:
These parameters are static. They do not
take effect until you restart your DIVA T/A.
AT!N4=n
AT!N41=n
ISDN Subaddress for 2
nd
B-channel: The
ISDN subaddress is used to further identify the
terminal on the ISDN basic rate interface for
your primary (AT!N4=n) or alternate
(AT!N41=n) configuration. In cases where
two terminals share the same directory
number, the subaddress identifies which
terminal will answer a particular incoming
call. This number is a string with up to 20
characters. Valid characters are: 0-9, *, and #.
Default: null string (this is an optional value).
Note:
These parameters are static. They do not
take effect until you restart your DIVA T/A.
AT!On Outgoing Call Type. Specifies the call type
for outgoing calls.
n=0
Data call (default)
n=3
Data over voice bearer capability call
Note:
If you fail to connect with any of the primary ISDN settings, the
DIVA T/A attempts the connection with the alternate ISDN
parameters.