Filter
Top Products
DIVA T/A PC Card Reference Guide 45
V.110 Configuration Commands
This section describes the V.110 configuration commands.
Command Description
AT!V0=
n V.100 Configuration Override
: Specifies whether the
DIVA T/A uses the COM port setting to configure V.110
or overrides them with user settings.
n=0 Use the default settings
n=1 Override the COM port settings as per AT!V1,
AT!V2, AT!V3, AT!V4, and AT!V5
Default: n=1
AT!V1=
n V.110 Stream Rate:
Specifies the V.110 Stream Rate
Values for n=1200, 2400, 4800, 9600, 19200
Default: 19200.
AT!V2=
n V.110 Character Length:
Specifies the character
length.
Values for n= 7 or 8
Default: 8
AT!V3=
n V.110 Parity:
Specifies the parity used for V.110.
Values for n= 0 (none), 1 (even), 2(odd), 3(one), 4(zero).
Default: 0
AT!V4=n
V.110 Stop Bits.
Specifies the Stop Bits used for V.100.
Values for n= 1 or 2.
Default: 2
AT!V5=n
V.110 Flow Control.
Specifies the Flow Control
method to be used for V.110.
Values for n= 0(none), 1(receive only), 2(transmit only),
3 (receive and transmit).
Default:1 (receive only).