Filter
Top Products
DIVA T/A PC Card Reference Guide 49
Multilink PPP Commands—Continued
Command Description
AT%P6=n Set Initial Billing Interval Timer. Sets the timer
(secs) to match the amount of time your ISDN
provider allocates as the first time interval.
Note:
If the value is set to 0, the timer is not used.
Setting this value to 0, also effectively sets
AT%P7 to 0.
n can be a value from 0 to 65535.
Default value=60 seconds
AT%P7=n Set Billing Interval Timer. Sets the timer (secs)
to match the amount of time your ISDN provider
designates as the minimum chargeable unit for all
subsequent billing..
Note:
If the value is set to 0, the timer is not used.
n can be a value from 0 to 65535.
Default value=60 seconds