Filter
Top Products
TouchPad
Description Spare part number
For use only with a black top cover 607766-001
Before removing the TouchPad, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3.
Disconnect the power from the computer by first unplugging the power cord from the AC outlet
and then unplugging the AC adapter from the computer.
4. Remove the battery (see
Battery on page 38).
5. Remove the following components:
a.
Service cover (see
Service cover on page 40).
b. Keyboard (see
Keyboard on page 54).
c. Top cover (see
Top cover on page 57).
d. Speakers (see
Speakers on page 60).
Remove the TouchPad:
1. Turn the top cover upside down, with the front toward you.
2.
Release the TouchPad cable (1) from the top cover. (The TouchPad cable is attached to the top
cover with double-sided adhesive).
3. Remove the two Phillips PM2.0×4.0 screws (2) that secure the TouchPad bracket to the top cover.
4. Remove the TouchPad bracket (3).
5. Release the TouchPad (4) by lifting the front edge until it rests at an angle.
62 Chapter 4 Removal and replacement procedures