Filter
Top Products
Display assembly
Description Spare part number
10.1-in display assembly (includes display panel cable, 2 WLAN transceivers and cables, 2 WWAN transceivers and cables,
and webcam/microphone module and cable):
●
10.1-in, WSVGA, AntiGlare, standard display assembly in black 607744-001
●
10.1-in, WSVGA, AntiGlare, standard display assembly in white 607745-001
●
10.1-in, WSVGA, Anti-Glare, standard display assembly in black 607746-001
●
10.1-in, WSVGA, standard display assembly in black 619469-001
●
10.1-in, WSVGA, standard display assembly in black 619470-001
●
10.1-in, WSVGA, Anti-Glare, standard display assembly in black 618875-001
●
10.1-in, WSVGA, AntiGlare display panel non-PMMA in red 622656-001
●
10.1-in, WSVGA, AntiGlare display panel non-PMMA with WWAN, in blue 622657-001
●
10.1-in, WSVGA, AntiGlare display panel non-PMMA with WWAN, in red 622658-001
●
10.1-in, WSVGA, AntiGlare display panel non-PMMA with WWAN, in blue 622559–001
Before removing the display assembly, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet
and then unplugging the AC adapter from the computer.
4.
Remove the battery (see
Battery on page 38).
5. Remove the service cover (see
Service cover on page 40).
6. Disconnect the WWAN antenna cables from the WWAN module (see
WWAN module
on page 43).
7. Disconnect the WLAN antenna cables from the WLAN module (see
WLAN module on page 46).
8.
Remove the keyboard (see
Keyboard on page 54).
9. Remove the top cover (see
Top cover on page 57).
Remove the display assembly:
1. Close the computer.
2. Turn the computer upside down, with the front toward you.
64 Chapter 4 Removal and replacement procedures