Filter
Top Products
1740 SHDSL 2/4-Wire Router User’s Guide
14.2 OAM Loopback
Click on Utilities on the Advanced menu bar, and click on the Loopback tab on the main screen.
After filling out the following parameters, click Start Loopback to perform the loopback.
Flow Type Choose the F5 loopback type. Seg is the segment loopback. It verifies the connection
between the router and DSLAM. Ete is the end-to-end loopback, verifying the connection
between the router and the ISP Broadband RAS.
VPI Specify the VPI that will perform the loopback.
VCI Specify the VCI that will perform the loopback.
Loopback
ID
Specify the ID number on the ATM network that will loop back the signals.
68 September 2004 1740-A2-GB20-10