Filter
Top Products
1740 SHDSL 2/4-Wire Router User’s Guide
17.7 Save the Configurations
The new parameters can function immediately without being saved to the flash memory. However, to use
these parameters after you restart the router, you must save them to the flash memory.
To write the configurations, enter MAIN/WRITE and press the Y key. After saving the configurations, you
will be prompted if you need to reboot the device. Press the Y key to reboot the device or press the N key
to keep operating the device.
17.8 Login
STEP 1: Configure your workstation to the same network segment as the router, such as IP address
192.168.1.133 and subnet mask 255.255.255.0.
84 September 2004 1740-A2-GB20-10