HP (Hewlett-Packard) 2200 All in One Printer User Manual


 
additional setup information
60
hp psc 2200 series
1
Press Setup.
2
Press 5, then press 8.
This selects Maintenance, and then selects View Angle.
3
Press Enter, press or until the text in the front-panel display
appears as desired, then press Enter.
connect your hp psc to your computer
Your HP PSC supports HOT Swapping, meaning you can connect to the
HP PSC while the power is on at your computer and on the HP PSC.
connect your usb
port
Connecting your computer to your HP PSC with USB is straightforward.
Simply plug one end of the USB cable into the back of your computer and
the other in the back of the HP PSC.
We recommend using a USB cable that is 3 meters (9.8
feet) in length, or less.
what works what does not work
Plugging into the USB port on your
computer
Plugging into the USB port located
on the keyboard
Plugging into a powered hub that is
connected to the USB port on your
computer
Plugging into a non-powered USB
hub
AppleTalk is not supported.